GRIZZLY - MUZZLE BRAKE STAINLESS - THREAD: M14X1P - DIA: 18.2MM - SKU: GBS18.2M14

Australian made muzzle brakes.

The GBS18.2M14 Grizzly muzzle brake is designed for calibres up to .30cal. These brakes are an easy, convenient screw on design that do not require any crush washers or special tools. Just screw the muzzle brake on all the way to the shoulder of your barrel and then fasten tight with the tool provided. Due to the perfectly aligned machined gas ports, this design disperses energy evenly around the brake, creating greater balance thus eliminating deviation from the muzzle blast.

PLEASE NOTE - Calibres over .30cal must be modified by a gunsmith.

The GBS18.2M14 standard thread size is:

• M14X1P

The GBS18.2M14 Dimensions are 18.2mm (0.716in) diameter, 18.2mm (0.716in) 61.65mm (2.427in) in length and it weighs 54 grams (1.904oz).

The GBS18.2M14 is suitable for many firearms for a flush fitting muzzle brake that have this barrel profile. It can also be fitted to a smaller barrel profile, if the M14X1P thread size is what you require and a slightly larger diameter brake is prefered.

 The GBS18.2M14 with a M14X1P thread size was specifically designed for the Pre 2018 Lithgow Crossover for the following calibres:

• .223rem
• .243win
• .308win

Note: For the post 2018 Lithgow Crossover model's Grizzly has the following brakes to suit your needs.

GB18.2 for the blued model

GBS18.2 for the stainless model.

The pre 2018 lithgow crossover thread for all rimfires is 1/2x20TPI

"SSAA Reviews the Australian Made Grizzly Muzzle Brakes" read on....