GRIZZLY - MUZZLE BRAKE BLUED - THREAD: 1/2X28TPI - DIA: 18.2MM - SKU: GB18.21

Australian made muzzle brakes.

The GB18.21 Grizzly muzzle brake is designed for calibres up to .30cal. These brakes are an easy, convenient screw on design that do not require any crush washers or special tools. Just screw the muzzle brake on all the way to the shoulder of your barrel and then fasten tight with the tool provided. Due to the perfectly aligned machined gas ports, this design disperses energy evenly around the brake, creating greater balance thus eliminating deviation from the muzzle blast.

PLEASE NOTE - Calibres over .30cal must be modified by a gunsmith.

The GB18.21 standard thread size is:

• 1/2x28TPI

The GB18.21 Dimensions are 18.2mm (0.716in) diameter, 61.65mm (2.427in) in length and it weighs 54 grams (1.904oz).

The GB18.21 is suitable for many firearms for a flush fitting muzzle brake that have this barrel profile. It can also be fitted to a smaller barrel profile, if the 1/2x28TPI thread size is what you require and a slightly larger diameter brake is prefered.

 The GB18.1 with a  1/2x28TPI thread size was specifically designed for the POST 2018 Lithgow Crossover for the following calibres:

• .17hmr
• .22lr
• .22wmr
• .223rem

Note: The pre 2018 Lithgow Crossover thread for .17hmr, .22lr, & .22wmr  is:

• 1/2x20TPI

"SSAA Reviews the Australian Made Grizzly Muzzle Brakes" read on....