GRIZZLY - MUZZLE BRAKE STAINLESS - THREAD: 1/2X28TPI - DIA: 15.6MM - SKU: GBS15.61
Australian made muzzle brakes.
The GBS15.6-1/2x28TPI Grizzly muzzle brake is designed for calibres up to .30cal. These brakes are an easy, convenient screw on design that do not require any crush washers or special tools. Just screw the muzzle brake on all the way to the shoulder of your barrel and then fasten tight with the tool provided. Due to the perfectly aligned machined gas ports, this design disperses energy evenly around the brake, creating greater balance thus eliminating deviation from the muzzle blast.
PLEASE NOTE - Calibres over .30cal must be modified by a gunsmith.
The GBS15.6 standard thread sizes are:
- 1/2x28TPI
- 9/16x24TPI
The GBS15.6 Dimensions are 17.40mm (0.685in) diameter at the base, 15.6mm (0.614in) at the tapered end and 62mm (2.440in) in length and it weighs 43-48 grams (1.51-1.69 oz)
The GBS15.6 Barrel profile is suitable for the following firearms for a flush fitting muzzle brake:
- Browning X bolt
- Tikka T3 / T3X
- Sako
- CZ
- Weatherby
- Howa
- Haene
