GRIZZLY - TAC MUZZLE BRAKE BLUED - THREAD: 5/8 X 24TPI - SKU: GTAC5/8
Australian made muzzle brakes.
The GTAC5/8 Grizzly muzzle brake is designed for calibres up to .338cal. These brakes are an easy, convenient screw on design that do not require any crush washers or special tools. Just screw the muzzle brake on all the way past the shoulder, be sure to align it square on the barrel and then tighten the two allen key bolts on the top of the brake. This tactical brake will accommodate all barrel profiles up to 22mm (0.866in) with or without a 5/8x24TPI thread. If you dont have a thread your local gunsmith will be more than happy to fit this well designed tactical muzzle brake on your firearm for a modest charge.
PLEASE NOTE - Calibres over .338cal must be modified by a gunsmith.
The GTAC5/8 standard thread size is:
- 5/8x24TPI
The GTAC5/8 Dimensions are 65mm (2.559in) in length, 33mm (1.299in) high, 25mm (0.984in) wide and it weighs 200 grams (7.05oz).
The GTAC5/8 is suited to the following firearms with a factory thread:
- Tikka CTR Varmint
- Howa Varmint
- Remington Varmint
- Kimber Varmint
- Savage Varmint
The GTAC5/8 is also suited to many other firearm makes, that have the same barrel profile, but dont yet have a thread. Its as easy as taking your muzzle brake to your local gunsmith and asking him to fit it. Its that easy.
This brake is supplied ready to go in a stainless steel or matte blued finish, however if what you require for your tactical set up is a custom finish, then look no further because for a minimal charge, its as easy as calling the store and requesting to have a cerakote finish of your specific colour choice applied to the brake, for that perfect custom touch.
"SSAA Reviews the Australian Made Grizzly Muzzle Brakes" read on....